You are here: Products 
Level measurement Vrtulkové snímače Původní snímače MAIHAK Propeller sensor MBA 2.2 Ex
Level measurement Vrtulkové snímače Původní snímače MAIHAK Propeller sensor MBA 2.2 Ex Propeller sensor MBA 2.2 Ex
| 
Originally manufactured level sensor from MAIHAK, later MAIHAK-SICK for horizontal installation. The sensor has not been manufactured for many years, but there is a replacement in the new series. You can use the parameters below to correctly identify the replacement.
MBA 2.2 Ex and MBA 2.2 Ex/Z10 / CSA for CSA standard
| Technical data | |
|---|---|
Grain size: |
30 mm |
| Working position: |
perpendicular from above
|
| Immersion depth: | 200 mm up to 6000 mm in steps of 100 mm |
| Shaft: |
with protective tube against material loading damage; version MBA 2.2 Ex / Z10 with shaft guide
|
| Blade size: | 98mm x 40mm or 250mm x 100mm lightweight materials |
| Submerged material: | verze -N-: smooth steel verze -R3-: all submerged stainless steel parts |
|
Evaluation part material:
|
Al cast |
| Protection DIN 40050: |
Evaluation part IP 54, submerged part IP 65
|
| Flange: | Flange DN 125 PN6 |
| Power supply: | 230VAC, 115VAC, 24VAC, 42VAC, with tolerance 15%, 50/60 Hz, 12VDC, 24VDC, 60VDC,with tolerance 5%, |
|
Power consumption:
|
3 VA |
|
Transport and storage temperature:
|
- 20°C...+60°C |
|
Material temperature:
|
max.+80°C - (does not apply to special designs) |
|
Ambient temperature:
|
max.+60°C - (does not apply to special designs) |
| Overpressure in the tank: | max. 0,8 bar (0,08 MPa) - (does not apply to special designs) |
|
Products since 2000:
|
max. 0,8 bar (0,08 MPa) |
| Weight: |
approx. 23.5 kg + 2.5 kg / m protective tubes and shafts
|
|
Special design
| |
| Hypertension: | MBA 2.2 DT Ex - 3 bar (0,3 MPa), 150°C |
|
Special design
Ex | |
| Options: | |
| Unpainted: | B3 |
|
Tropical protection:
|
B4 |
| Run control: | E2 |
| Electric heating: | H |
| Orders: | |
| Design: (standard or special design) |
|
| Embodiment-N- or -R-: | |
| Flange or thread: | |
| Impeller length: | |
| Impeller size: | |
| Power supply: | |
| Options: | |